Z-Line Flashlights

Alpha Model A112

Improving upon our popular Alpha (Gen 2), the Gen 3 Elzetta Alpha A112 Weapon Grade Flashlight has a redesigned LED driver circuit that produces exceptional performance using a high drain IMR RCR123 cell while remaining safe and compatible with a CR123 primary cell.

Elzetta Alpha A112 is a simple compact LED flashlight that keeps it simple.  Only 4 inches long, this little dynamo can ride in your pocket and emerge to provide an impressive 535 lumens of light with a single push of the button.

See detailed description and technical specifications below.

Model B142

Elzetta Bravo B142 distributes 850 lumens of light in a broad pattern with a mere push of the button on the simple Click Tailcap.  The substantial field-replaceable Flood Lens spreads light while the Standard Bezel Ring keeps everything streamlined for snag-free operation.  See detailed description and technical specifications below.

Bones Flashlight provides legendary Elzetta performance

Elzetta Bones Flashlight emits 850 brilliant lumens with a mere push of the button on the simple Click Tailcap.  The field-replaceable optical lens provides unsurpassed beam quality while fully potted electronics ensure unsurpassed durability.  Operates on two (2) CR123A batteries (included) or one 18650 rechargeable battery (not included).

Type III MIL-SPEC hard coat in Black.

See detailed description and technical specifications below.

Blue Bones Flashlight provides legendary Elzetta performance

Originally produced as a limited Special Edition, this Blue version of the Bones flashlight was released back in 2017, celebrating 10 years of Elzetta Design. It was a very popular release and sold out quickly! We have since received a steady stream of comments about this version and requests to bring it back.

The Blue coating on this Bones is Type II (or “regular“) anodizing, NOT Mil-Spec Type III (or “hard”) anodizing, yet it is still quite durable. The difference is in the thickness of the coating and how far the coating penetrates the aluminum surface. Some wear is expected with normal use and is not covered under warranty.

Type II regular anodizing is an aluminum only oxidation process with a thickness of coatings ranging from .0001-.0005 penetration and .0003-.0005 buildup. This is about 10 times thinner than Type III hard coating! Type II can be decoratively dyed nearly any color.

Type III hardcoat anodizing forms a thick oxide coating (.001 penetration into the substrate and .001 build up.) Type III hardcoat is much thicker and more wear-resistant, so if you are looking for the hardest coat possible, see our original Elzetta Bones Flashlight.

Elzetta Bones Flashlight emits 850 brilliant lumens with a mere push of the button on the simple Click Tailcap.  The field-replaceable optical lens provides a soft edge beam quality while fully potted electronics ensure unsurpassed durability.  Operates on two (2) CR123A batteries (included) or one 18650 rechargeable battery (not included).

See detailed description and technical specifications below.

Model B452

Model B452 is a great choice for those wanting rugged yet simplistic performance.  It utilizes our HC (High Candela) Head, which produces 600 lumens and 15,750 candela with a neutral beam tint of 4500K CCT, and our simple Click Tailcap for ease of operation.  This head is a fantastic mid-range spotter and will easily illuminate objects at 50 yards and beyond.   The head is certainly a departure from our love for solid acrylic optics.  We found that today’s latest LED technology, specifically intended to produce higher intensity emission patterns, favor the use of reflector-based solutions.  With the correct design philosophy and elements, our solution produces less beam artifacts, increased light transmission efficiency, and results in a small weight savings when compared to similar sized solid optics.

Made in USA.

Click “Additional Information” for detailed technical specifications (lumens, candela, etc).

Model A113

The Gen 3 Alpha Weapon Grade Flashlight has an LED driver circuit that produces exceptional performance using a high drain IMR RCR123 cell while remaining safe and compatible with a CR123 primary cell.

Model A113 is the best-selling member of our Alpha Series.  With its convenient High-Low Tailcap, this small tactical LED flashlight may be the ultimate illumination device for everyday carry (EDC).  An astounding 535 lumens on High and a useful 50 lumens in Low Mode equips you with the right amount of light for any situation.

Model B333. The Elzetta Bravo B333 out-sells all other configurations, and for good reasons.

Our most popular model Elzetta Bravo B333 starts with the AVS Head, adds an aggressive Crenellated Bezel Ring and a convenient and easy to use High-Low Tailcap.

The Crenellated Bezel Ring not only looks mean, it provides a strike implement should an adversary get too personal. It comes in handy in some emergency situations as well.

The 7/8-inch-thick optical lens provides the necessary durability for CQB while providing amazing soft edge beam quality with plenty of throw and spill.

The push-button of the High-Low Tailcap controls on/off while rotation of the Tailcap selects the mode.  Select ‘High’ mode and 850 lumens are steadily discharged with a runtime of 1.5 hours.  ‘Low’ mode is reduced to 25 lumens and runtime is extended to an amazing 60 hours.

Fully potted electronics, a critical feature other manufacturers skip, keep circuit boards and solder joints sealed and locked in place for over-the-top durability.

Model C133. The Elzetta Charlie C133 features our AVS Head and a convenient, easy to use High-Low Tailcap.

The smooth standard bezel is a snag-free design that slips easily in and out of pockets, pouches or bags.

1,350 lumens are steadily discharged in High mode with a reasonable 40 lumens available in Low mode. The standard 7/8-inch thick optical lens provides amazing beam quality and scoffs at abuse that would shatter any cover-lens found on reflector-based flashlights.

The push-button of the Elzetta Charlie C133 controls on/off while rotation of the Tailcap selects the mode.  Screw the Tailcap all the way on for full output or loosen it a bit (anywhere from a few degrees to 1/4 turn) and low-mode is engaged.  The mode may be selected whether the Light is on or off.

Fully potted electronics, a critical feature almost never found on flashlights produced by most other manufacturers, seal circuit boards and solder joints and lock them in place for over-the-top durability.