A113 Deluxe Kit
The Alpha A113 comes with:
- Alpha body and LED module
- TIR Standard Lens (Solid Clear Optical Acrylic)
- Standard Smooth Bezel Ring
- High/Low Tailcap with Decoupled Binary Interface
The complete Deluxe Kit will also come with:
- Crenellated Bezel Ring
- TIR Flood Lens (Solid Optical Acrylic)
- Thyrm Switchback Ring for enhanced flashlight manipulation and control
With these components, you can configure four different models of Elzetta Alpha flashlights:
- A113 – Standard Bezel, Standard Lens, High/Low Tailcap ($165.00 Value)
- A123 – Standard Bezel, Flood Lens, High/Low Tailcap ($165.00 Value)
- A313 – Crenellated Bezel, Standard Lens, High/Low Tailcap ($170.00 Value)
- A323 – Crenellated Bezel, Flood Lens, High/Low Tailcap ($170.00 Value)
And to top it all off, we threw in:
- FREE O-Ring Replacement Kit ($5.95 Value)
- FREE Lanyard Kit ($6.95 Value)
The Elzetta A113 uses our Standard Bezel Ring for a smooth snag-free profile that slips easily in and out of pockets, pouches, and bags.
The High-Low Tailcap unleashes a 10-second burst of 800 lumens before the output is subtly tapered down over a period of about 30 seconds, then regulated to a constant 535 lumens in High Mode. Low Mode offers an ample 50 lumens for most common uses. See our blog post on User Interface for a demonstration of this unique system. When using a primary CR123 cell as fuel, the A113 will produce a 10-second burst of 535 lumens, then regulate down to a constant 435 lumens.
The standard optical lens uses the phenomenon of total internal reflection (TIR) to project a soft-edge beam of neutral-tint light with a good balance of throw and spill.
With all of these features plus Elzetta’s legendary reliability and durability, the Elzetta A113 is the ultimate tactical flashlight for every day carry (EDC). Power is supplied by a single CR123A battery (included) or a single IMR RCR123 cell.
The Deluxe Kit for Alpha A113 also comes with an extra Alpha flood Lens and Crenellated Bezel, giving you four separate configurations of Alpha flashlight.
If a high frequency strobe is desired, it is now fully integrated into the head and can be activated by double-tapping the switch. Simply cycle the light off to disengage the strobe function. A non-strobe version is also available if you do not want a strobe function.
NOTE: There is no “High/Strobe” tailcap for Alpha Gen3! Strobe mode is integrated into the head of the Alpha (if strobe is desired) and is activated with a simple double-click of the switch on ANY tailcap. DO NOT USE ALPHA GEN2 “HIGH/LOW” OR “HIGH/STROBE” TAILCAPS WITH ALPHA GEN3! IT WILL DESTROY THE GEN2 TAILCAPS!
Made in USA by Americans.
