Name: Elzetta Shotgun Illumination Kit
SKU: B142-ZSM-T
Price: 212.92 USD
Availability: InStock

SALE

Elzetta Shotgun Illumination Kit: ZSM Flashlight Mount with thumbscrew and B142 Flashlight.

Elzetta High Output Illumination Kit with ZSM flashlight mount installed on shotgun

Elzetta Bravo AVS Runtime Graph Showing Steady 850 Lumens for Approximately 50 Minutes, Then Tapering Down to 90 Lumens Over Next 50 Minutes

Elzetta Bravo with AVS Head and Flood Lens Beam Pattern Image on 6 ft. Square Graph. 850 Lumens

Elzetta Shotgun Illumination Kit

From: Original price was: $266.15.Current price is: $212.92.

Elzetta Shotgun Illumination Kit

Save 20% Purchasing This Kit

Kit includes a Model B142 Modular Flashlight and a ZSM-T Mount with Thumb Screw at a savings of 20% from buying them individually. (Cannot be used with any other discount, or coupon, or savings offer.)

The ultimate lighting system for your tactical shotgun. (See detailed description below).

WILL NOT WORK WITH: Mossberg 590A1, Benelli M3, Benelli Super Nova, Mossberg 930 SPX. Also will not work with Mossberg Shockwave or Remington TAC-14 (neither firearm has the required 1.75” mounting space available).

B142

We have configured Bravo model B142 specifically for shotgun applications, with the low profile standard bezel and the flood lens, producing a room-filling wall of light at a constant 850 lumens.

Custom Shop Engraving Option

Enter personalized engraving text if desired (+$10.00)

Elzetta ZSM Shotgun Flashlight Mount Installed on a Shotgun with C133 Flashlight

ZSM-T

ZSM-T Shotgun Flashlight Mount with Thumb Screw

Offset flashlight mount which fits most full size shotguns such as Remington 870/1100, Mossberg 500/590, Benelli M4 (except SuperNova), and Winchester 1200/1300/Defender
WILL NOT WORK WITH: Mossberg 590A1, Benelli M3, Benelli Super Nova, Mossberg 930 SPX. Also will not work with Mossberg Shockwave or Remington TAC-14 (neither firearm has the required 1.75” mounting space available).
Requires mounting to barrel AND magazine tube with 1.75 inches of free mounting space in front of action with no obstructions such as a heatshield
Attaches to either side of shotgun making it configurable for left or right-handed shooters
Fits most tactical flashlights bodies 0.97 to 1.05 inches in diameter (flashlight is NOT included)
Sizing adapters for smaller sized flashlights are sold separately and are not included.
Constructed of glass-filled polymer
Made in USA.

Click here for ZSM Shotgun Flashlight Mount without Thumb Screw.

High-Low Tailcap

Elzetta High-Low Tailcap for Bravo and Charlie Models

Provides practical 'Low' Mode as well as full-output 'High' Mode. (Not compatible with Alpha or Bones)

Add for

Elzetta Standard AVS Lens

Elzetta Standard AVS Lens for High Output AVS Head

Fits all Bravo And Charlie models, as well as the Bones flashlights.

Add for

Crenellated AVS Bezel Ring

Elzetta Crenellated Bezel Ring for AVS Head

Made from Mil-Spec Type III hard anodized 6061-T6 aluminum, the Elzetta Crenellated Bezel can add strike tool capability to your Elzetta Bravo or Charlie flashlight as well as personal protection.

Add for

SKU: B142-ZSM-T Categories: Bundles, Illumination Kits, Retail Catalog Tags: Automatic voltage sensing, Elzetta b142, Elzetta Bravo, illumination kit, shotgun light, weaponlight, ZSM shotgun light mount

Description
Additional information

Description

The Elzetta Shotgun Illumination Kit Transforms Your Shotgun

Save 20% When Purchasing This Kit

This is the kit to have when you need the best possible lighting system for your shotgun. The Shotgun Illumination Kit includes our ZSM-T Shotgun Flashlight Mount with Thumb Screw and our Model B142 Modular Flashlight. We have configured Bravo model B142 specifically for shotgun applications, with the low profile standard bezel and the flood lens, producing a room-filling wall of light at a constant 850 lumens. The ZSM-T Shotgun Mount includes a thumbscrew for easier mounting and dismounting. The Elzetta Shotgun Illumination Kit will transform your Remington, Mossberg, Winchester, or Benelli shotgun into the ultimate home defense/close quarters battle (CQB) weapon system.

This kit will save you 20% from buying the two products individually. (Cannot be used with any other discount or coupon or savings offer.)

WILL NOT WORK WITH: Mossberg 590A1, Benelli M3, Benelli Super Nova, Mossberg 930 SPX. Also will not work with Mossberg Shockwave or Remington TAC-14 (neither firearm has the required 1.75” mounting space available).

Click “Additional Information” for detailed specifications for the Bravo Model B142.

WARNING: Make sure firearm is not loaded. Remove shells and examine chamber. Use safe handling procedures at all times. Do not alter or adjust unless instructed to do so below. Upon completing the installation of this product, check operation of shotgun’s pump action and ensure no interference exits.

Step 1:

Assemble Shotgun Mount (with Gauge adapters, if appropriate) using a 7/64″ hex wrench for bottom screws and 5/32″ for larger top screws.
Tighten bottom screws to 10 in0lbs maximum and top to 20 in-lbs. maximum.
DO NOT use a ft-lb wrench.
Loctite 222 is recommended for bottom fasteners.

Step 2:

Disassemble Outer Clamp and re-assemble Outer Clamp using 7/64″ hex wrench and screws and nuts.
Tighten all screws to 10 in-lbs. maximum.
DO NOT use a ft-lb wrench.
Loctite 222 is recommended except for center clamp screw.

ZSM installation illustration 3. Image shows clipping locations for sizing adapter to accommodate flashlights of 0.87-inch to 0.97-inch diameters.

Step 3: (Sizing Adapters are sold separately)

For flashlight diameters from 0.70” to 0.86” (18 to 22mm), use sizing adapters as-is.
For flashlight diameters from 0.87” to 0.97” (22 to 25mm), cut Adapters along red lines as shown above.

ZSM installation illustration 4. Image shows clipping locations to adapt ZSM to 20 gauge firearms.

Step 4: Determine Requirement for Gauge Adapters:

For 12 Gauge, Adapters are not needed.
For 20 Gauge, trim Adapter along red lines as shown above.
May fit some older model .410 Gauge firearms without trimming.

Step 5: Check operation of shotgun’s action and ensure that shells feed properly from the magazine.

Gauge Adapter Before Trimming

Gauge Adapter After Trimming

Sizing Adapter Before Trimming

Sizing Adapter After Trimming

**For the sight impaired, please contact us at support@elzetta.com for assistance.**

Additional information

B142

Weight	.5 lbs
Dimensions	9.25 × 5.25 × 2 in
Output (Lumens)	850
Intensity (Candela)	1,915
Beam Distance (meters)	102
Runtime (minutes)	90
Body Diameter (inches)	1.0
Bezel Diameter (inches)	1.45
Length (inches)	5.5
Weight (ounces)	6.2
CCT (Correlated Color Temperature)	6000K

ZSM-T

Weight	.324 lbs
Dimensions	8 × 5.125 × 1.75 in

High-Low Tailcap

Weight	.062 lbs
Dimensions	1.5 × 1.5 × 2 in

Elzetta Standard AVS Lens

Weight	.04 lbs
Dimensions	1.5 × 1.5 × 2 in

Crenellated AVS Bezel Ring

Weight	.036 lbs
Dimensions	1.5 × 1.5 × 2 in

Quick-Build Charlie Configurator Price range: $225.50 through $287.90
C133-KIT From: Original price was: $333.00.Current price is: $258.07.
B333-KIT Original price was: $316.50.Current price is: $244.05.
Elzetta Rifle Illumination Kit From: Original price was: $277.15.Current price is: $221.72.
Elzetta Shotgun Illumination Kit From: Original price was: $266.15.Current price is: $212.92.
Quick-Build Bravo Configurator Price range: $209.00 through $271.40
A113-KIT From: Original price was: $221.90.Current price is: $163.63.
Elzetta Blue Bones Flashlight $159.50
Bones Flashlight $159.50
Elzetta Picatinny Illumination Kit From: Original price was: $187.00.Current price is: $149.60.
Quick-Build Alpha Configurator Price range: $143.00 through $188.90
G-EDC-RCR $59.95
ZSM $43.95
G-EDC-AA $39.95
ZRX $38.50

Elzetta Shotgun Illumination Kit

Save 20%