Description
The Elzetta Alpha A322 is intended for indoor and very close range applications.
With a simple Click Tailcap, the small Elzetta Alpha A322 tactical LED flashlight generates a low-intensity 535 lumens of neutral-tint white light. The beam is projected through a solid acrylic flood lens producing a uniform wall of light with a soft-edge that gradually fades into the environment.
When using a high drain IMR RCR123 cell, the Alpha Gen3 A322 unleashes a 10-second burst of 800 lumens before the output is subtly tapered off over a period of approximately 30 seconds, then regulated to a constant 535 lumens. This subtle tapering is designed intentionally, so as to not distract the user with a sudden drop in luminosity during critical operations. The burst mode resets every time the power is cycled off and back on again, so the burst mode can be more easily perceived after the light has been on for at least 20-30 seconds, then cycled off and back on again.
When using a primary CR123 cell as fuel, the A322 will produce a 10-second burst of 535 lumens, then subtly regulate down to a constant 435 lumens.
The Crenellated Bezel Ring doubles as a strike or twist implement for self defense. The intuitive click switch works silently like a ballpoint pen providing momentary activation with a light press and latches for constant-on operation when depressed further. There are no secondary modes in the click tailcap.
A high frequency strobe is now fully integrated into the head and can be activated by double-tapping the switch. Simply cycle the light off to disengage the strobe function.
NOTE: There is no “High/Strobe” tailcap for Alpha Gen3! Strobe mode is integrated into the head and is activated with a simple double-click of the switch on ANY tailcap. DO NOT USE ALPHA GEN2 “HIGH/LOW” OR “HIGH/STROBE” WITH ALPHA GEN3! IT WILL DESTROY THE GEN2 TAILCAPS!
Made in USA. Lifetime Guarantee.
Click “Additional Information” for detailed technical specifications (lumens, candela, etc).