Description
It is easy to see why the Elzetta Alpha A113 is our best-selling Alpha Series Flashlight.
The Elzetta Alpha A113 uses our Standard Bezel Ring for a smooth snag-free profile that slips easily in and out of pockets, pouches, and bags. The standard optical lens uses the phenomenon of total internal reflection (TIR) to project a soft-edge beam of neutral-tint light with a good balance of throw and spill. With all of these features plus Elzetta’s legendary reliability and durability, the Elzetta A113 is the ultimate tactical flashlight for every day carry (EDC). Power is supplied by a single CR123A battery (included) or a single IMR RCR123 cell.
When using a high drain IMR RCR123 cell, the High-Low Tailcap unleashes a 10-second burst of 800 lumens before the output is subtly tapered down over a period of about 30 seconds, then regulated to a constant 535 lumens in High Mode (Tailcap screwed on fully clockwise). This subtle tapering is designed intentionally, so as to not distract the user with a sudden drop in luminosity during critical operations. The burst mode resets every time the power is cycled off and back on again, so the burst mode can be more easily perceived after the light has been on for at least 20-30 seconds, then cycled off and back on again.
Low Mode (unscrew the Tailcap anywhere from a few degrees to 1/4 turn) offers an ample 50 lumens for most common uses. See our blog post on User Interface for a demonstration of this unique system.
When using a primary CR123 cell as fuel, the A113 will produce a 10-second burst of 535 lumens, then regulate down to a constant 435 lumens.
A high frequency strobe is now fully integrated into the head and can be activated by double-tapping the switch. Simply cycle the light off to disengage the strobe function.
NOTE: There is no “High/Strobe” tailcap for Alpha Gen3! Strobe mode is integrated into the head and is activated with a simple double-click of the switch on ANY tailcap. DO NOT USE ALPHA GEN2 “HIGH/LOW” OR “HIGH/STROBE” WITH ALPHA GEN3! IT WILL DESTROY THE GEN2 TAILCAPS!
Made in USA without compromise and guaranteed forever.
Click “Additional Information” for detailed technical specifications (lumens, candela, etc).
