Description
Do one thing and do it well. That’s what the Elzetta Alpha A312 Modular Flashlight is all about.
Its simple Click Tailcap works like a silent ballpoint pen (push-on, push-off) to control the projection of 535 lumens of neutral-tint light. Full output is obtained every time it’s turned on. Like all Elzetta Flashlights, Elzetta Alpha A312 boasts fully potted electronics and a solid acrylic optical lens (no reflector) for the ultimate durability. The Crenellated Bezel Ring can be used as a strike defense tool.
When using a high drain IMR RCR123 cell, the Alpha Gen3 A312 unleashes a 10-second burst of 800 lumens before the output is subtly tapered off over a period of approximately 30 seconds, then regulated to a constant 535 lumens. This subtle tapering is designed intentionally, so as to not distract the user with a sudden drop in luminosity during critical operations. The burst mode resets every time the power is cycled off and back on again, so the burst mode can be more easily perceived after the light has been on for at least 20-30 seconds, then cycled off and back on again.
When using a primary CR123 cell as fuel, the A312 will produce a 10-second burst of 535 lumens, then subtly regulate down to a constant 435 lumens.
A high frequency strobe is now fully integrated into the head and can be activated by double-tapping the switch. Simply cycle the light off to disengage the strobe function.
NOTE: There is no “High/Strobe” tailcap for Alpha Gen3! Strobe mode is integrated into the head and is activated with a simple double-click of the switch on ANY tailcap. DO NOT USE ALPHA GEN2 “HIGH/LOW” OR “HIGH/STROBE” WITH ALPHA GEN3! IT WILL DESTROY THE GEN2 TAILCAPS!
Made by dedicated craftsmen in the USA and guaranteed forever.
Click “Additional Information” for detailed technical specifications (lumens, candela, etc).